1、济南专业防水http://www.tianyujian.com/谈到防水涂料应该选择品牌新型聚合物水泥基防水涂料。因为这类材料是专门针对家庭防水特点而研制开发的，材料由有机高分子液料和无机粉料复合而成，融合了有机材料弹性高和无机材料耐久性好的优点，涂覆后形成高强坚韧的防水涂膜，具有防水性能好、耐老化，抗龟裂等优势，绿色环保，施工方便等特点。
Jinan professional waterproof waterproof coating should choose the brand comes to the new polymer cement-based waterproof coating. Because these materials are designed for family and developed a waterproof characteristics, composite materials made from organic materials and inorganic polymer powder was made, the integration of organic materials and inorganic materials, durability, high flexibility, good benefits, after the formation of high-strength coating tough waterproof coating, with good water resistance, anti-aging, anti-cracking and other advantages of convenience, environmental protection, construction and other features.
2、济南专业防水介绍基面处理是防水施工关键，防水材料涂刷基面要求坚固、干净。基面必须坚固、平整、干净，无灰尘、油腻、蜡、脱模剂等以及其它碎屑物质；基面有孔隙、裂缝、不平等缺陷的，须预先用水泥砂浆修补抹平，伸缩缝建议粘贴塑胶条，节点须加一层无纺布，管口填充建议使用雷邦仕管口灌浆料。
Jinan professional waterproof introduce base surface treatment is the key to waterproof construction, waterproof material brushing sturdy base surface clean. Base must be strong, smooth, clean and free of dust, grease, wax, release
agents and other detritus; base has pores, cracks, inequality defects shall be pre-patched with cement mortar smooth, joints proposal paste the plastic strip, the node must add a layer non-woven, filling spout nozzle is recommended Lei
Bangshi grout.
3、济南专业防水http://www.tianyujian.com/介绍涂刷防水涂料每层厚度不能超过1mm，两层涂刷总厚度不能超过2mm。涂刷时力度均匀，注意不要漏刷；前后两遍涂刷时保持垂直相交的角度，以充分覆盖到位；单次涂刷不宜过厚，特别是管口和转角处。
Jinan professional waterproof introduce brushing waterproof coating thickness of each layer should not exceed 1mm, the total thickness of no more than two brushing 2mm. When brushing uniform intensity, be careful not to leak brush;
perpendicular angle to keep brushing twice before, in order to fully cover in place; a single brush should not be too thick, especially the nozzle and corner.
