1、济南防水公司http://www.tianyujian.com/谈到对于铝合金窗户做防水防漏作业时，要清除铝合金和玻璃、铝合金和铝合金材料之间的已经老化了的密封材料。考虑到铝合金窗的结构一般为凹进结构的，因此，为防止雨季下雨后发生雨水的毛细现象，窗户顶部要做滴水鹰嘴。
When it comes to waterproofing company Jinan Aluminium windows do water leak, clear the aging of the sealing material of aluminum and glass, aluminum and aluminum alloy materials. Taking into account the aluminum window structure is generally recessed structure, therefore, occurred after the rainy season in order to prevent rain rain capillarity, the top of the window do drip beak.
2、济南防水公司介绍玻璃于铝合金粘接处不要使用胶条进行粘接，会粘不住，一定要使用密封胶，要将密封胶注入到玻璃和铝合金框连接处才能稳妥的粘黏在一起，而且不会发生雨水从此处渗漏至屋内的现象。
Jinan waterproofing company presentation at the bonding glass to aluminum bonding strips do not use, it will not stick, be sure to use sealant to sealant injected into the glass and aluminum frame to secure the connection with sticky and rainwater leaking from here to the house does not occur.
3、济南防水公司介绍窗户框周边与其他材料的交界处同样要使用密封胶进行粘接，并且要使用防水密封胶。窗户防水，虽说如果外墙渗水，屋内做防水基本上作用不大，所以，窗户的防水防漏要先从外墙做起，在外窗框的周边要刷涂防水材料，比如说丙烯酸类、JS类等。
Jinan waterproofing company introduced around the window frames and other materials at the junction of the same adhesive sealant to be used, and to use a waterproof sealant. Windows waterproof, although if the external walls of water seepage, the house is basically a waterproof little effect, so the windows from the outside wall of water leak first start, you want to brush around the outer sash waterproof material, such as acrylic, JS and so on.
4、济南防水公司http://www.tianyujian.com/建议在铝合金材拉床轨道处多打几个排水槽，这样能防止雨季来临时雨水不会存积在窗户槽内排不出去，多打几个排水槽让雨水能及时顺利的从轨道内排出。窗户底部与窗台的交接处，窗台板要设计成朝外的并且要有一定的坡度，方便雨水向下流而不会流入室内。窗台板与窗户的胶缝要设计成朝外的，不能设计成朝上的。
Jinan waterproof aluminum timber company recommends broaching track at more than a few drainage channels, which can prevent the rainy season is not accumulated rainwater tank in the window did not break out, more than a few drainage channels so that rainwater can promptly smoothly discharged from the inner rail. The bottom of the window and sill junction, sill plate and should be designed to have a certain outward slope, rainwater flows down rather easily flow into the room. Sill plates and windows should be designed to glue seam outward, not designed to be upward.
